500GPH Electronic Sensing Bilge Pump – 12V
In the next generation sensing bilge pumps, the 500GPH S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes.
Water is kept in check between 1/8″ and 3/8″!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!
All that plus the added benefits of our standard bilge pump:
- Check valve included with hidden air vent to prevent airlocking
- True electromagnetic suppression (EMC)
- A built-in thermal cell that protects the pump and the vessel when things get too hot
These are the smallest automatic pumps available on the market!!!
Features:
- Completely automatic with manual override – No Float Switch Needed!
- Submersible and Ignition Protected
- High efficiency, low amp motor
- Stainless-steel shaft
- Includes backflow preventer
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 0.8 g |
|---|---|
| Dimensions | 7 × 7 × 4 cm |
Brand
Rule
Accessories
No literature available for this product.
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Bilge Pumps
Rule 2000Non-Automatic 12v, UL listed w/ 6′ wire leads Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8″ (28.6mm) discharge outlet. FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 2000 Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8″ (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Computerized operation – no float switch required Fully Submersible Easy clean triple stage snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule-A-Matic® Float Switch Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up to 14 [...]
Marine Plumbing & Ventilation > Bilge Pumps
Little Pal Utility Pump Compact polished brass multi-purpose hand pump Ideal for small engine and gearbox oil drain Simply pump old oil out with dipstick probe Oil and corrosion resistant brass and neoprene construction with up to 1 gpm output Small enough to fit any tool box WARNING: This product can expose you to chemicals [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 2000 Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8″ (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 1500Non-Automatic 24v High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8″ (28.6mm) discharge outlet. FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 2000 Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8″ (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean triple stage snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out [...]
Marine Plumbing & Ventilation > Bilge Pumps
Stainless Steel Debris Strainer Extra measure of protection for use on round based Rule pumps up to 3700 GPH (14010 LPH). Installs directly into existing strainer. Filters out excess debris and helps prevent jamming and failure. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California [...]