Standard 4-Conductor Cable
Includes waterproof coupler kits (not shown in photograph) for joining two cables together. Use with wireless or cabled Vantage Pro2 or original Vantage Pro, and WeatherLink for Vantage Pro2, Wizard, or Monitor.
Also for use with:
- Anemometer
- Rain Collector
- Temperature Sensor or Probe
- UV Sensor
- Solar Radiation Sensor
| Weight | 0.2 g |
|---|---|
| Dimensions | 6 × 3 × 2 cm |
Brand
Davis Instruments
No accessories available for this product.
No videos available for this product.
Related products
Outdoor > Weather Instruments
Soil Moisture Sensor, Vantage Pro® and Vantage Pro2™ Watermark® soil moisture sensor uses electrical resistance to measure the moisture level of the soil. Does not require periodic maintenance during the growing season. Simply bury at the desired depth, then monitor moisture levels throughout the season. Add up to 4 sensors to a single Leaf & [...]
Outdoor > Weather Instruments
Yagi Antenna for Long-Range Repeater Use with Long-Range Repeater (Davis 7654) to extend range up to 5,000′ in one direction. Each repeater requires two antennas. You can combine one Omni and one Yagi antenna to collect data from all directions and transmit in a single direction, or vice versa.Includes mounting hardware. NOTE:FCC regulations require that [...]
Outdoor > Weather Instruments
Anemometer Transmitter Kit Product DescriptionWith Vantage Pro2, this solar-powered kit allows you to mount the anemometer in a different location than the integrated sensor suite (up to 1,000′ (300M) from your wireless console/receiver).With Envoy8X, you can use this kit with any of our sensors including solar radiation, UV, temperature, anemometer, rain and third-party sensors that [...]
Outdoor > Weather Instruments
Sensor Mounting Shelf For mounting solar radiation sensor and/or UV sensor on Vantage Pro and Vantage Pro2 integrated sensor suite. Rigid shelf with anodized aluminum posts and stainless steel hardware attaches easily next to the rain collector on the outside of the integrated sensor suite.Compatible with both original Vantage Pro and Vantage Pro2.
Outdoor > Weather Instruments
Stainless Steel Temperature Probe w/RJ Connector Measure temperature of air, soil, or water with this multi-purpose temperature probe. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect’s internal temperature sensor. Great option for measuring water or soil temperature without [...]
Outdoor > Weather Instruments
Wireless Repeater with Solar Power For longer distances or to improve reception in troublesome areas, add one or more Wireless Repeaters. Transmitting and receiving range for each repeater is up to 1000′ (300M) outdoors, line of sight; typical range through walls under most conditions is 200′ to 400′ (60 to 120M). Includes solar panel, regulator [...]
Outdoor > Weather Instruments
Davis 6322 Wireless Integrated Sensor Suite w/Standard Radiation Shield
Wireless Vantage Pro2™ Integrated Sensor Suite Our Integrated Sensor Suite combines our rain collector, temperature and humidity sensors, and anemometer into one package – making setup easy with great performance and reliability.For use with Vantage Connect, Vantage Pro2 and Vantage Vue consoles, Weather Envoy and WeatherLink.For improved accuracy, temperature and humidity sensors are housed inside [...]
Outdoor > Weather Instruments
Cabled Weather Envoy™ Receive data from a cabled Vantage Pro integrated sensor suite, and post it to your computer without a console! When used along with a WeatherLink data logger and software package, Weather Envoy will collect and store data from the outdoor sensors. Compatible with Vantage Pro2 only; not compatible with original Vantage Pro.