7601 DC Mini ACR Automatic Charging Relay – 65 Amp
Features:
- 65 Amp continuous rating manages the charging current from alternators up to 65 Amps found on most outboards and many inboard engines
- Compact case design allows surface and panel mounting
- Senses charging on two battery banks
- Snap-on cover insulates terminal connections
- LED indicates ACR status
- 1/4″ x .032″ male quick connect terminal for ground
- 5/8″ (16 mm) stud length to accept multiple cable terminals
- 12V DC voltage input
Specifications:
- Intermittent Rating: 5 min.: 115A
- Terminal Stud Size: 1/4″-20
- Relay Contact Position: Open (30 sec.): 12.75V DC
- Continuous Rating: 65A
- Maximum Torque: 75 in-lb (8.5 Nm)
- Relay Contact Position – Open High: 16.0V DC
- Amperage Operating Current: 175mA (Combine)
- Relay Contact Position: Combine (30 sec.): 13.0V DC
- Under Voltage Lockout: 9.5V DC
- Amperage Operating Current: 15mA (Open)
- Relay Contact Position: Combine (2 min.): 13.6V DC
- Maximum Cable Size: 1/0 AWG
- Relay Contact Position: Open (10 sec.): 12.35V DC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 0.6 g |
|---|---|
| Dimensions | 7 × 4 × 3 cm |
Brand
Blue Sea Systems
Accessories
- Blue Sea 5005 ANL 35-300AMP Fuse Block w/Cover
- Blue Sea 5191 Terminal Fuse Block 30-300AMP
- Blue Sea 5502 Fuse Block Class T 225-400 Amp
- Blue Sea 5503 ANL 750 Fuse Block w/ Cover
- Ancor Red 1 AWG Battery Cable - Sold By The Foot
- Ancor Red 1/0 AWG Battery Cable - Sold By The Foot
- Ancor Red 2/0 AWG Battery Cable - Sold By The Foot
- Ancor Red 3/0 AWG Battery Cable - Sold By The Foot
- Ancor Red 4/0 AWG Battery Cable - Sold By The Foot
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Electrical > Battery Management
Blue Sea 6007 m-Series (Mini) Battery Switch Selector Four Position Red
6007m-Series (Mini) Battery Switch Selector Make before break contact design allows switching between battery banks without power interruption Selector Switches battery bank 1 or battery bank 2 or both to a single load using one switch Features: Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear [...]
Electrical > Battery Management
Blue Sea 7902 Icon Circuit Identification Label Kit for Battery Switches
7902Icon Circuit Identification Label Kit for Battery Switches 18 icon labels for battery switches, use to identify circuits Examples: Battery, Bow Thruster, Chassis Engine, House WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more [...]
Electrical > Battery Management
Battery Selector Switch Part No. 2111A Features New ergonomically styled turn knob provides easy On/Off switching Updated color scheme and graphics make it easier to determine switch status Longer stud lengths for improved assembly and easier cable routing Built with heavy-duty copper sweep contacts to ensure positive circuit control Rugged internal components protected by a [...]
Electrical > Battery Management
e-Series Dual Circuit Plus PN 5511e (1) 100A C-Series Flat Rocker Circuit Breaker(2) 15A Push Button Thermal Circuit Breakers Designed for twin engine configurations Provides 24 hour circuit protection Provides main DC circuit protection in addition to high ampere load protection Protects electronics from sags and spikes caused by engine cranking Allows emergency cross connect [...]
Electrical > Battery Management
5510EDual Circuit Battery Switch CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8" – 16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals 7/8" stud [...]
Electrical > Battery Management
Diesel Power Battery Heavy-Duty Switch Features: For 6, 12, 24 or 36 Volt systems Polycarbonate case One year warranty Specifications: Continuous Amps: 450 Momentary Amps: 800 Cable Lug Size: 1/2″ Color: Gray Dimensions: 5-1/2″ sq x 3-1/2″H WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of [...]
Electrical > Battery Management
6010m-Series (Mini) Battery Switch Dual Circuit™ Switches both positive and negative lines simultaneously with one simple ON/OFF switch meeting European and metal boat requirements for a double pole switch Switches circuits of different voltages, such as 12 volt and 24 volt, simultaneously with one simple ON/OFF switch Features: Ignition protected – Safe for installation aboard [...]
Electrical > Battery Management
Battery Selector Switch with AFD Part No. 2110A Description Continuous Amps: 230Momentary Amps: 345Dimensions: 5″D x 2-3/4″H Product FeaturesAlternator field disconnect (AFD) allows selection of any positions, including “off” without damage to alternator or electrical system. AFD is required on some electrical systems. Heavy duty copper sweep contacts “Make before break” contacts allow selection of [...]