RAM Motorcycle Fork Stem Base with 1″ Ball
The RAM fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5 degrees to 1.10 degrees at the following intervals:
| Metric | Standard |
| 12mm | .5 degrees |
| 14mm | .55 degrees |
| 16mm | .63 degrees |
| 18mm | .71 degrees |
| 20mm | .79 degrees |
| 28mm | 1.10 degrees |
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1″ Rubber Ball “B” Size
Note: The “U” in the part number reflects product packaged in poly bag. RAM recommends that you review the installation instructions for this part prior to ordering.
| Weight | 0.2 g |
|---|---|
| Dimensions | 4 × 4 × 1 cm |
Brand
RAM Mounting Systems
Accessories
- RAM Mount Short Double Socket Arm f/1" Ball Bases
- RAM Mount Long Double Socket Arm f/1" Ball Bases
- RAM Mount Double Socket Arm f/1" Ball
- RAM Mount Double Socket Arm w/Diamond Base
- RAM Mount Double Socket Arm w/2.5" Round Base
- RAM Mount Double Socket Swivel Arm
- RAM Mount Short Double Socket Arm w/Diamond Base
- RAM Mount Long Double Socket Arm w/Diamond Base
- RAM Mount Short Double Socket Arm w/2.5" Round Base
- RAM Mount Long Double Socket Arm w/2.5" Round Base
Literature
Quick Guide: Download PDF
No videos available for this product.
Related products
Ram Mount Store > B Size
RAM 1/4″ NPT Female Threaded Hole Base w/Post & 2 1″ Balls Color: Black Powder CoatMaterial: Powder Coated Marine Grade AluminumBall Size: 1 inch Rubber Ball
Ram Mount Store > B Size
RAM Double 1″ Ball Adapter The RAM-B-230U, double ball joiner, consists of a 1″ rubber ball on both ends that allow the connection of two 1″ socket arms. When measured from ball center to ball center the arm length is 1.75″. This mount is ideal if the your mount arm is just too short. Material: [...]
Ram Mount Store > B Size
RAM Motorcycle 1″ Ball Adapter for Brake/Clutch Reservoir Base This ball connects to the open hole on the side of the RAM-B-309-1U (single 1″ ball) and is included with the purchase of the RAM-B-309-2U (double 1″ ball). Material: Powder Coated Marine Grade Aluminum Ball Size: 1″ Rubber Ball “B” Size Note:The “U” in the part [...]
Ram Mount Store > B Size
RAM 1″ x 2″ Rectangle Base w/1″ Ball Material: Powder Coated Marine Grade Aluminum Color: Black Powder CoatBall Size: 1 inch Rubber Ball
Ram Mount Store > B Size
RAM 1.5″ Max Width Square Rail Base with 1″ Diameter Ball Material:Powder Coated Marine Grade Aluminum Ball Size: 1″ Rubber Ball Size Note:The “U” in the part number reflects product packaged in poly bag.
Ram Mount Store > B Size
RAM V-Base Rail Yoke Clamp Mount f/Beechcraft AirplanesPart #: RAM-B-108BU Accommodates rails from 1.0″ to a maximum of 2.1″ in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a [...]
Ram Mount Store > B Size
RAM Yoke Clamp Base with 1″ Rubber Ball and 1/4-20″ Tap for Camera or Video The RAM-B-121BAU, yoke clamp mount with 1/4″-20 thread, will fit rails from 0.625″ to 1.25″ in diameter. The 1″ rubber ball is set at a right angle to the plane of the mount, so when connected to a rail, the [...]
Ram Mount Store > B Size
RAM 3″ Max Width Square Rail Base with 1″ Diameter Ball Material:Powder Coated Marine Grade Aluminum Ball Size: 1″ Rubber Ball Size Note:The “U” in the part number reflects product packaged in poly bag.