Blue Sea 7621 ML-Series Automatic Charging Relay (Magnetic Latch) 24V DC
$313.83
Out of stock
7621
Manual Control: No
Coil Voltage: 24V DC
- Combines battery banks during charging and isolates under discharge
- 500 Ampere continuous rating suitable for use with large battery banks, starters, alternators, and inverter/chargers
- Can be remotely combined with optional switch
- Silver alloy contacts provide high reliability
- 3/8″ copper studs, using Blue Sea Systems superior one piece stud technology, suitable for 300 Ampere continuous rating and large cable connections
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 2.05 g |
|---|---|
| Dimensions | 11 × 7 × 3 cm |
Brand
Blue Sea Systems
Accessories
- Blue Sea 2146 ML-Series Remote Control Contura Switch - ON-OFF-ON
- Ancor Red 1 AWG Battery Cable - Sold By The Foot
- Ancor Red 1/0 AWG Battery Cable - Sold By The Foot
- Ancor Red 2/0 AWG Battery Cable - Sold By The Foot
- Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Red 3/0 AWG Battery Cable - Sold By The Foot
- Ancor Red 4/0 AWG Battery Cable - Sold By The Foot
- Ancor Heavy Duty Lugs - 3/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 2-Pack
Videos
Video 1: Link
Related products
Electrical > Battery Management
Blue Sea 3000 HD-Series Battery Switch Single Circuit ON/OFF
HD-Series Battery Switch Single Circuit ON/OFF Features: 600 Ampere Continuous Rating Accepts two 4/0 battery cables per terminal Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept multiple cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht Council (ABYC) [...]
Electrical > Battery Management
Battery Selector Switch with AFD Part No. 2110A Description Continuous Amps: 230Momentary Amps: 345Dimensions: 5″D x 2-3/4″H Product FeaturesAlternator field disconnect (AFD) allows selection of any positions, including “off” without damage to alternator or electrical system. AFD is required on some electrical systems. Heavy duty copper sweep contacts “Make before break” contacts allow selection of [...]
Electrical > Battery Management
Blue Sea 9002e e-Series Battery Switch Selector w/Alternator Field Disconnect
9002e e-Series Battery Switch Selector with Alternator Field Disconnect Features: Switches isolated battery banks to all loads or combines battery banks to all loads Includes AFD (Alternator Field Disconnect) Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel [...]
Electrical > Battery Management
m-Series Dual Circuit Plus PN 6011 (1) 100A C-Series Flat Rocker Circuit Breaker(2) 15A Push Button Thermal Circuit Breakers Designed for twin engine configurations Provides 24 hour circuit protection Provides main DC circuit protection in addition to high ampere load protection Protects electronics from sags and spikes caused by engine cranking Allows emergency cross connect [...]
Electrical > Battery Management
Blue Sea 3001 HD-Series Battery Switch Single Circuit ON/OFF w/AFD
3001 HD-Series Battery Switch Single Circuit ON/OFF with AFD Features: 600 Ampere Continuous Rating Accepts two 4/0 battery cables per terminal Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept multiple cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht [...]
Electrical > Battery Management
Single Circuit On/Off CE Marked Enables a failed House or Start battery bank to be isolated from the electrical system and both House and Start loads to be operated from the remaining battery bank Simplifies battery switch operation Isolates Start circuit from House circuit Protects electronics from sags and spikes caused by engine cranking Ignition [...]
Electrical > Battery Management
Battery Selector Switch Part No. 2111A Features New ergonomically styled turn knob provides easy On/Off switching Updated color scheme and graphics make it easier to determine switch status Longer stud lengths for improved assembly and easier cable routing Built with heavy-duty copper sweep contacts to ensure positive circuit control Rugged internal components protected by a [...]
Electrical > Battery Management
5510EDual Circuit Battery Switch CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8" – 16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals 7/8" stud [...]