Rule In-Line Blower – 4″ Ducting
Part Number: 240
Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets.
Features
- Efficient high-volume air flow
- Quiet operation
- Low amp draw
- Slip-on inlet and outlet ducting connections
- Sealed motor shaft for moisture protection
- Corrosion resistant nickel-plated motor housing
- IMCI (CE)
- USCG 183.410 Compliant: Ignition protected
Applications:
Race cars and helmet ventilation
Bus ventilation (engine and bathroom fumes)
Prison van ventilation (cooling, air-freshening)
Blow-up signs and mascots
Tanning booths
Building ventilation
Specifications
- Approvals: CE
- Dimensions (H x W x D): 102 x 152 x 106 (mm)
- ElectricalCharacteristics: 4.3 Amp
- Flow Rate (US gallons & litres): 235 CFM @ Open Flow
- Fuse Size: 7 (amp)
- Product Inlet Fitting: 4″ (102 mm) Ducting
- Product Outlet Fitting: 4″ (102 mm) Ducting
- Voltage: 13.6 (Vdc)
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
| Weight | 1 g |
|---|---|
| Dimensions | 6 × 5 × 5 cm |
Brand
Rule
Accessories
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Blowers & Heaters
Premium Defroster Kit 9kW – 24V Marine defroster/ heater with 9kW heater coil and double 24V radial blowers. Wiring harness, 4-step control panel and hose adapters included. Specifications: Weight: 5 kg/11 lbs Dimensions: 441/17.5L x 130/5.12H x 220/8.6W mm/in Type: KIT-L compartment defroster/heater Certification: CE approved according to marine standards
Marine Plumbing & Ventilation > Blowers & Heaters
Heavy Duty Flexmount BlowerDC 250 CFM Flexmount Continuous Duty 4″ Blower Extended Life 5,000 Hour Motor Tough Reinforced Thermoset Plastic Housing Mounts to Any Flat Surface Slip-On Inlet Ducting Connection Efficient High Volume Air Flow Low-Current Draw Corrosion-Resistant Materials Throughout N.M.M.A Type Accepted Meets USCG Electrical Regulations to Title 33 Chapter I, Part 183 Subpart [...]
Marine Plumbing & Ventilation > Blowers & Heaters
Premium Defroster 9kW – 24V Marine defroster/heater with 9kW heater coil and double 24V radial blowers. Specifications: Weight: 5 kg/11 lbs Dimensions: 441/17.5L x 130/5.12H x 220/8.6W mm/in Type: L compartment defroster/heater Certification: CE approved according to marine standards
Marine Plumbing & Ventilation > Blowers & Heaters
AC 100 CFM Flangemount 3″ Blowers Features: Tough Reinforced Plastic Housing Continuous duty motor with thermal overload Mount to any surface Slip-On Inlet and Outlet Ducting Connection Efficient High Volume Air Flow Corrosion-Resistant Materials Throughout WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to [...]
Marine Plumbing & Ventilation > Blowers & Heaters
Flexmount BlowerDC 150 CFM Flexmount 3″ Blower Tough Reinforced Plastic Housing Universal flexmount bracket permits outlet to face any direction Slip-On Inlet and Outlet Ducting Connection Efficient High Volume Air Flow Low Current Draw Corrosion-Resistant Materials Throughout N.M.M.A Type Accepted WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to [...]
Marine Plumbing & Ventilation > Blowers & Heaters
DC 250 CFM Flangemount 4″ Blowers Features: Tough Reinforced Plastic Housing Mount to any Flat surface Slip-On Inlet Ducting Connection Efficient High Volume Air Flow Low Current Draw Corrosion-Resistant Materials Throughout N.M.M.A. Type Accepted Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection Complies with Complies with ISO 9097 MARINE WARNING: This product [...]
Marine Plumbing & Ventilation > Blowers & Heaters
Premium Defroster 12kW – 12V Marine defroster/heater with 12kW heater coil and double 12V radial blowers. Specifications: Weight: 6 kg/13 lbs Dimensions: 403/17.7L x 172/6.8H x 269/10.6W mm/in Type: XL compartment defroster/heater Certification: CE approved according to marine standards
Marine Plumbing & Ventilation > Blowers & Heaters
DC 105 CFM Flangemount 3″ Blowers Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately [...]