Classic Flotation Coat – Red – XLBased on the original Mustang Floater Coat, the ANSI High Visibility Flotation Coat is engineered to provide comfort, warmth, and durability.  Most importantly, the Coat’s closed-cell foam insulation will provide flotation and in-water insulation to delay the onset of hypothermia in the event of accidental water immersion.  Combined with [...]

101 XD Actuator- 12 Volt- 2-1/4  Stroke with Mounting Hardware The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches.   Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff [...]

Brown 16 AWG Primary Wire – 500′ Pacer’s marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 16 AWG marine wire is constructed in the USA to achieve the highest level of quality.  Built from Type III class K tinned copper, this [...]

SS60 20° Tilt Thru-Hull 600W, 50/200kHz Transducer – 8-Pin This stainless steel 600 W 8-pin transducer provides a vertical beam without a fairing and is excellent for fiberglass and wood hulls. It has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45/12 degrees; and a [...]

Battery Powered Bimini – Black Anodized Frame & Beige Fabric Enjoy the convenience of a powered canopy with the SureShade Battery-Powered Bimini. It easily installs on your pontoon boat without the hassle of complicated wiring. Retract and extend the shade from the battery-powered receiver. This model has a black anodized frame and beige canopy fabric. [...]

Sink Drain with Flip Stopper – Chrome Plated Brass This sink drain is chrome-plated brass and has a flip-stopper. Features: Fits a 1-5/8 in. drain hole and a 1-1/4 in. outlet This drain is designed to work with Scandvik sinks #10280 and 10281 *The “P” within the part number indicates retail packaging

1100GPH Electronic Sensing Bilge Pump – 12V In the next generation sensing bilge pumps, the 1100GPH 12V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to [...]

2″ Bronze High Speed Thru-Hull Fitting w/Nut  Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze