Smart Tabs II Series Trim Tabs 16 X 10 f/23-30' Boats – 6500lbs MaxIMPROVES YOUR BOATS OVERALL PERFORMANCE – GUARANTEED!!!If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that [...]

Red 14 AWG Tinned Copper Wire – 500′ Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even [...]

X-Rap® Magnum® 20 Purple Mackerel The massive diving-lip takes the X-Rap® Magnums deep… unassisted. Nothing to hinder the action. Each dives to its preset depth…the XRMag10 to 10 feet, the XRM15 to 15 feet, etc. Run up to 13 knots for big game fish worldwide.  Features: Deep Diving Lip Models with Colored Lip for Extra [...]

CD Rack 8-5/8″W x 5-5/8″H x 5-1/4″DHolds 16 jewel case CDs

Performance RCA Cable – 4 Channel – 6′ For a superior listening experience, these performance RCA connector cables are designed to deliver a clean, clear and enhanced audio signal from your Fusion stereo to your Fusion amplifier.   Features: Superior Noise Rejection – The directional, shielded twisted pair cable provides superior noise rejection, resulting in [...]

Spinnaker Pole Slide Car (32mm) Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends. Plain bearing genoa cars, sliders, and spinnaker pole slides, plus stand-up blocks. A popular range of Genoa cars and sliders designed to run on 32mm [...]

8 AWG – #10 Nylon Ring Terminal – 25-Pack Ancor’s Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but [...]

60WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16″ thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with:SS60B60