DA645Mini-UHF male to UHF maleNickel finish

Mastercraft Ballast Pump – 12V The Jabsco Wake/Surf boat Ballast pump is the direct replacement for Mastercraft part number 300249. The Jabsco pump comes standard with a green Run Dry Impeller and has the standard electrical quick connector already installed. Just connect your hoses, mount the pump in the boat, plug the power leads together [...]

ShadeFin Fixed Rod Holder Mount Enjoy your ShadeFin in any standard rod holder with our Fixed Rod Holder Mount. Simply install by inserting the Fixed Rod Holder Mount into a firmly welded rod holder. Sliding the gimbal-slot butt end over the rod holder’s gimbal pin with the open end out makes a secure, quick connection. [...]

500GPH Electronic Sensing Bilge Pump – 12V In the next generation sensing bilge pumps, the 500GPH S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run [...]

PT-7 Battery Charger Newmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life. A selector switch adjusts [...]

Outlet Cover/Receptacle Plate Height:5-1/16″ Width:3-5/8″

Edge Mount Mounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mount Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs [...]

Sender Fuel Level (American 8″-16″) (Single) Features: 8 to 16 in. Fuel Level Sending Unit 8 in. to 16 in. tank depth Single station For use with US OHM scale gauges This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.