G-6 Twin Eye Fender 11″ x 30″ – Sand with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced ropeholds for long-term durability. Utility [...]

HDI Nosecone Transducer Get the fish-finding capability of Lowrance CHIRP Sonar and the high-resolution views of structure and cover from DownScan Imaging with the HDI Nosecone transducer. Easy to remove and install, the HDI Nosecone gives anglers with a compatible display the option to view the best of Lowrance CHIRP and DownScan Imaging on one [...]

Aluminum Anode Kit The Actuators on each Seakeeper Ride controller have sacrificial anodes that need to be periodically inspected and replaced when about half of the anode has worn down. Installation Remove the blade by unscrewing the four (4) M8-1.25 x 20mm screws and their washers. Unscrew the two (2) M4-0.7 x 12 mm bolts [...]

Andros Chest – Teak Features: Andros Teak Chest 33-1/2″W x 18-3/8″H x 17-1/2″D Slat sides, solid top Can be used as a bench Stainless Steel hardware Fully assembled Oiled finish

Deep-Pipe Level Sender – 1000mm – 240 to 33 OHM Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around [...]

FX-125 Anchor – 69lb  For over three decades, the much lighter Fortress Anchor has out-performed substantially heavier steel anchors in holding power tests conducted all around the world.  In the US Navy tests, not only did the Fortress out-perform heavier steel anchors, they were also able to withstand pull loads that averaged over 200x their [...]

Medium Tough-Claw™ Base w/Double Socket Arm & 1.5″ Round Base Adapter The RAP-404-202U consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped [...]

lil’ Fella Trolling PlateLittle brother to the Happy Troller® Fits all outboard motors up to and including 25hpLocks “down” for trolling, “up” for cruisingMade of highest quality polycarbonates with stainless steel hardware