Bronze Thru-Hull, Digital Depth and High-Precision Temp Sensor, with 7 Inch Stem and High Speed Fairing Block (7-Pin) Features:200 Watts 235 kHz Bronze Thru-Hull with 7″ Stem Depth and High-Precision Temperature ( + / – .02 degree ) 10-Meter Cable with 7-Pin Connector Fairing Block and Installation Materials Included WARNING: This product can expose you [...]

3/8″Premium 3-Strand Dock Line – White with Tracer – 15′ The Premium 3-Strand Nylon from New England Ropes features outstanding strength and high abrasion resistance. Premium 3-Strand Nylon is a long-wearing, flexible and easy-to-handle rope that has greater strength and better abrasion resistance than all other 3-strand nylon lines.  The highest tenacity nylon treated with [...]

RitchieSport Compass Features: 2″ (51 mm) Direct-Reading, High Visibility Dials Two-Sided, Self-Adhesive Mounting Pads Included Reversible Bracket allows a mounting range of over 300 degrees from overhead, through angled and vertical mounts to horizontal surfaces These mounting position options and your choice of mounting hardware permit mounting on everything from windshield or supporting frame structures, [...]

Battery Cable Assembly, 2 AWG (34mm²) Wire, 5/16″ (7.93mm) Stud, Black – 18″ (45.7cm) Ancor Marine Grade Standard Battery Cable Assemblies are manufactured with Ancor’s premium UL1426 tinned copper battery cable. The battery cable is fine stranded to produce maximum conductivity and flexibility. In addition, all Ancor battery cable is flame retarded, UV inhibited, rated [...]

Navigator Compass Features: 4 1/2″ (115 mm) Ritchie CombiDial and Built-in Inclinometer When mounting this Compass to a bulkhead that is NOT perpendicular (90° angle) to the center-line of the boat and/or NOT vertical (90° angle) to the waterline of the boat (boat on level keel), a fairing block MUST be used to make the [...]

10M RayNet to RayNet Cable for e & c Series

MegaPress 316 FKM Tee – 4″ x 4″ x 1-1/2″ Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components: FKM sealing elements, grip rings, separator rings *Must be installed with MegaPress XL rings and PressBooster/Z3 actuator.

Rotating Inlet Set for NLP & LSG – 75mm Replacement rotating hose port, including Clamp Ring assembly and Seal for the Vetus NLP75, LSG75, LGS75, NLP375 and NLPH75.