G-5 Twin Eye Fender 8.8″ x 26.8″ – White with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility [...]

Boss Style T-Fitting – Nickel Typical Application: Fitting for back of helm in a dual station installation  Specifications: ORB, Size #6 to 3/8 COMP FITTING Cylinder/Helm Side = 9/16 – 18 UNF 2A Hose Side = 9/16 – 24 UNEF 2A

Amazon Thrudeck Pump Manual Bilge Pump Features: Connections: – for 25mm (1”) bore hose Dimensions: – 120mm high, 250mm wide, 210mm long with 260mm handle (nominal dimensions for variable pump configuration) Output: – up to 50 litres/minute (11 gallons/minute) Mounts through deck or through the bulkhead Light, compact pump with 16 port position variations Quick-release clamp ring for [...]

Low Friction Ring – 16mm Hole Low Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a nicely rounded internal profile for smooth control line trim under load, and [...]

Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent, not welded. Welding alters [...]

NAC-1 Outboard Hydraulic Autopilot Pack Features: Easy to Install, available for both Hydraulic and Cable steer systems Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course, or Route Automatic Turn Patters NAC-1 Plug & Socket connectors – no screw terminals or wire stripping necessary High efficiency, super-quiet 0.8L hydraulic gear pump (Pump-1 MKII) Add [...]

RAM® Track Ball™ Double Ball Mount with Garmin Spine Clip Holder  The RAM® Spine Clip holder is a mount adapter that easily clips into the integrated spine connection on a wide variety of Garmin devices. This kit is compatible with virtually any track system including the RAM® Tough-Track™ and is easy to install and remove [...]

Long stem for hulls with steep deadrise or thicker cored hulls. Compatible with the following sounder modules: DSM30 DSM300 Compatible hull material: Wood and fiberglass Max power: 600 watts Frequency: 200/50 kHz Cable: 30ft (10m) cable with connector Hole diameter for installation: 2″ Other: Self-sealing removable paddle wheel insert. High speed fairing block is included. [...]