Pink 18 AWG Tinned Copper Wire – 100′Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even in [...]

Triton 10/10 HV Triton HV Displays offer dedicated mast display that is not only rugged, but full of functionality. Glass bonded and packed full of B&G race-winning pedigree, Triton HV Displays can be easily integrated into your existing onboard electronics, and simply controlled via your Triton display. HV Displays offer zero condensation and outstanding contrast, [...]

Orange 18 AWG Primary Wire – 500′  Pacer’s marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 18 AWG marine wire is constructed in the USA to achieve the highest level of quality.  Built from Type III class K tinned copper, this [...]

Yellow 1 AWG Battery Cable – 100′  Pacer’s 1 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.   Oftentimes, marine applications are in enclosed areas with sharp turns. Installation can become difficult. Pacer simplified this process by developing flexible [...]

608 Wind Sensor Without Cable Networked wind sensor for Triton2, Triton, IS42, IS40 and IS20 systems. Sensor only, does not include cable. Compatible with previous 508 and IS20 wind sensor mast cables and brackets.

CO Alarm 12/24V DC with Interconnect – Black   A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV’s with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be [...]

Micro Standard Carbo-Cam Base with Bullseye Micro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base. Specifications: Height: 33mm/1-5/16in Weight: 85g/3oz Minimum line: 3mm / 1/8in Maximum line: 10mm / 3/8in Fastener spacing: 27mm / 1-1/16in Fasteners: 5 FH mm / #10 FH in Maximum working load: 91kg/ 200lb

Material: C.P. Brass Fastener: #10 (4) Flange: 6-1/8″ x 4-3/8″ Inside Diameter: 4″ x 2-1/4″