Deck Organizer – Size 2 – 2 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit.Suitable for boats up to 32′ (9.75 M) with halyard size up to 7/16″Deck organizers can be double stacked.Technical Specifications:Material – Spectro Anodized [...]

BM-1 Monel Basket – 1.9″ x 5.2″ Replacement Monel Raw Water Strainer Baskets are made of high-strength, corrosion-resistant Monel and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in length, and from 1.9 to 3.1 inches in [...]

Top Mount Ring SS Cup Holder – 3-Drink – Stud Mount Top mount drink holders are great for console and table tops. Our stud mount cup holders allow for blind fastening for a neat look on the top of the console or table. The ring diameter is large enough for a can koozie, bottle of [...]

Git Rot Kit – 4oz Unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry. Apply by injecting into wood. Will soak into wood by capillary action. One-half hour pot life after mixing. Cures overnight. Sandable and paintable, can [...]

Power-Pac 7AH Power Supply The 12V DC power supply features built-in backup batteries, which are charged during normal operation and then continue to power radios and critical navigation equipment when AC power is lost. The Power-Pac is ideal for commercial vessels, work boats, and yachts. The Power-Pac’s highly regulated, low-rising 10-amp output powers radios and [...]

Cockpit Coaming Bolster Set (2) – 4″ x 39″ & 20mm Thick – Caribbean Blue with Brushed Texture SeaDek Coaming Bolsters are a great alternative to traditional upholstered bolsters. Durable and easy to install, these bolsters will provide years of trouble-free service thanks to their closed-cell PE/EVA foam construction and robust pressure-sensitive adhesive. Each set [...]

XP 9 HW In-Hull Transducer In-Hull Dual Spectrum CHIRP Transducer supports Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz and max depth of 1200ft. Intended for glue-in installation inside single layer fiberglass hulls. Includes epoxy kit and 20’ cable.  Features: This accessory is compatible with [...]

Barrel Bolt Length: 4″Fastener: #6(6)Material: Polished Brass