Yellow 10 AWG Tinned Copper Wire – 1,000′Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even in [...]

Claw Anchor – Galvanized – 22lb Designed based on anchors used to secure oil rigs in the North Sea.  The Claw anchor is constructed of high-grade steel. The Claw anchor sets effortlessly and holds in a variety of sea beds and stows easily on the bow roller of most boats. Features: Suitable for use on [...]

7316 COTS Military Grade A-Series 40 Amp May be suitable for use when military specifications are required under CFR 46. Specifications: Amperage: 40A Actuator Style: Metal Toggle Poles: 2 Max Voltage: 277V AC, 65V DC Circuit Breaker Type: Magnetic Hydraulic – Trip Free Interrupt Capacity: 1500 A AC, 7500A DC Min Operating Temp: -40°C Max [...]

Zinc Cavitation Plate Anode for Volvo DPH Outdrives Tecnoseal Zinc Cavitation Plate Anode for Volvo DPH drives 3588746. Volvo part: 3588746 zinc. For use in salt water.

1/2 Eye Nut – 1-1/16″ Diameter Features: A complete range of single piece forged products for fastenings applications Outstanding breaking loads Available in different sizes Applications: Various fastening applications Towing application Waterskiing lines attachment Specifications: 1-1/16″ Diameter 1/2 Eye Nut

22mm Fiddle Micro Block with V-Jam Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Specifications: Sheave: 22mm / 7/8in. Length: 89mm / 3-1/2in. Weight: 57g / 2oz. Shackle pin: 5mm/ 3/16in Maximum line: 6mm / 1/4in. Maximum working load: [...]

NMEA 2000 Female Terminator Ancor’s NMEA 2000 Approved Terminators allow for proper termination of an NMEA 2000 network. The yellow couplers connect to the corresponding Ancor tees, creating a simplified, color coded network installation. One male and one female terminator is required for each NMEA 2000 network. Features: Color coded for easy installation and component [...]

Stainless Steel Washdown Spigot This is a rugged all-316 stainless steel washdown spigot. It has a standard 3/4-in. garden hose thread that provides easy hose attachment for quick washdowns. Specifications: Water Connection (inch): 1/2″ NPS-M threaded shaft  Flange Diameter (inch): 2-1/4″ Mounting Hole (inch): 1″ Shipping Weight: 2 lbs. Installation: For extra-thick bulkheads, use a [...]