Impulse A/M-33 All Clear® Auto/Manual Inflatable Life Jacket – BlueThe Onyx A/M-33 Inflatable Life Jacket is outfitted with everything you need to feel safe on the water without the bulky fit.Features:Sailing harness with soft loops and lay-flat designConvertible from automatic/manual to manual only inflation  All-Clear viewing window for an at-a glance look to make sure [...]

Explorer Compass Features: 2 3/4″ (70 mm) Easy to Read Direct Reading Dial Viewing is adjustable to 30 / Heel angle to 25 Easily Installed w/4 mounting screws provided, Fits 3″ (762 mm) Mounting Hole. Built-in Compensators to Easily Adjust for Deviation 12v Night Illumination 100% Repairable Exclusive 5-Year Ritchie Warranty Notes: Comes standard with [...]

12-10 AWG Heat Shrink Ring Terminal – 1/4″ Stud Size – 25 Pack Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. [...]

DTP Deutsch Receptacle Repair Kit – 14-12 AWG (4 Position) DTP Series Deutsch Connectors are the solution for power application requirements. The DTP line was developed to handle the need for higher amperage, multi-pin economical connectors.  Each circuit is capable of continuous 25 amp service.  Deutsch solid contacts (14-12 AWG) are included in the packs. [...]

Re-Arm Kit J 38G Auto Bayonet Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with a black bayonet, bobbin, and step-by-step re-arming instructions. Make sure to check your inflatable life jacket’s owner’s manual and the re-arming kit ensuring they [...]

Brass LED Dome Light – 4″ Lens  These LED dome lights are constructed of stamped polished brass and are lacquer coated to prevent tarnish. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration [...]

117WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16″ thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with:B117B150B744VB744VLB765CSS555

Perko 1-1/2″ IPS Intake Strainer BronzePERKO Intake Strainer are designed for easy installation and cleaning.Features include mounting lugs cast into both sides to assure universalmounting, four outside tie rods and a 316 stainless steel strainer basket tominimize electrolysis. Screen hole diameter .077 inches, 46% open area.Hinged lugs for the cast bronze cover permit easy removal [...]