HRMK2203 P-75 O-Ring for RCL-100 Series Searchlights Replacement O-Ring P75.Compatible With:RCL-100 series of searchlights*Sold as an individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Series 55 Ball Bearing Orbit Block™ – Single – Becket – Swivel Head LightweightKilogram for kilogram of working load, BB and RT Orbit Blocks™ are the world’s lightest. The unique orbital design allows the bearing to only be in the active areas of the floating sheave. This minimises the mass of the inactive return race [...]

MegaPress 316 FKM Tee – 3″ x 3″ x 2-1/2″ Features: For use with Sch. 5 to Sch. 40 stainless steel pipe 316 stainless steel Press connection Components: FKM sealing elements, grip rings, separator rings *Must be installed with MegaPress XL rings and PressBooster/Z3 actuator.

120 Volt AC 4 Position Features:All circuit label positions are backlit“ON” indicating LEDs installed in all circuit positions Includes 4206-Square Format Label Set Specifications:Positions: 4Nominal Voltage: 120V ACMaximum Amperage*: 100A Height: 4.75″ (120.65mm)Width: 4.88″ (123.95mm)Depth: 3.00″ (76.2mm)Weight: 1.57lb (0.71kg) * Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a [...]

HRC1002 Multipurpose watertight hand held remote control 2 Button. HRC is the new Quick range of multipurpose hand-held remote controls, designed to for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a [...]

1/4 NPT to 3/8 T-Fitting Typical Application: Fitting used in the back of the previous version of the UP series helms before the boss fitting Specifications: 1/4 NPT to 3/8 COMP FITTING Helm Side = 1/4 NPT Hose Side = 9/16 – 24 UNEF 2A

Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent, not welded. Welding alters [...]

Re-Arm Kit C 33g – Auto Hydrostatic The Auto Hydrostatic Re-Arm Kit contains everything necessary to re-arm your Mustang Survival Auto Hydrostatic inflatable PFD after deployment.  Regular maintenance can reduce the possibility of inadvertent inflation. Refer to your Owner’s Manual for the maintenance schedule.  The Auto Hydrostatic inflator cap and body should be replaced before [...]