PSS Shaft Seal Maintenance & Parts Replacement KitFOR 1 1/4″ SHAFT 2 1/4″ TUBEAs with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended [...]

RAM Double Swing Arm with 4″ Male and No Female Tele-Pole The RAM-VP-SW1-4, combination swing arm/tele-pole system, will connect to any RAM vehicle base with a welded female tele-pole, as well as RAM Framed Tough-Box Consoles. Included is a 4″ tele-pole that can be easily adjusted by turning the knob at the top of the [...]

Busbar 150A 4P & Cover 4X 1/4″ Terminals Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment. We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.

Sailfish Release Flag – 12″ x 18″ Display your catch proudly with Tigress Release Flags! Designs available for Swordfish as well as Blue and White Marlin. All flags are the standard 12” x 18”.

Standard Duplex Cable – Flat 16/2 AWG – 2 x 1mm² Red/Black – 100′ Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C [...]

ST CLB Circuit Breaker Block – 6 Position w/Negative Bus FeaturesQuick connect clips allow circuit breakers to snap easily into placeTin-plated copper busses and screw terminalsClear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirementsEasy to open clip on coverBreakouts allow wire access in two directionsAccepts ring terminalsOptional push button waterproof boots or [...]

G-2 Twin Eye Fender 4.5" x 15.5" – Metallic Blue Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term [...]

GP1513 SystemPod Pre-Cut for Raymarine a75/a77/a78 & 1 Instrument for 9.5″ Wide Guard GP1500 Series for 9.5″ Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room [...]